What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 01:01

An AC voltage/ current source, and an ac inductive load.
This is 'the assistant's answer'
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
CNN’s Live ‘Good Night, and Good Luck’ Telecast Spurs Special Coverage - Variety
Here is a simplified AC power diagram.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The bolt then partially travels down the line to your home.
Why would a person always be so tired?
For this case there are devices called Metal oxide varistors (MOV).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
Checkers Sweep Laval to Earn Trip to Calder Cup Finals - Charlotte Checkers Hockey
At least they know the answer if they wanted it.
2024–10–10[John johnson John Johnson ]
so, what happens?
What was your best unexpected reunion with your childhood best friend?
[image of Common-mode choke]
Now when you have a certain ac resistance, then a current flows in a loop.
It also is a device that limits the change in current flow.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Are you happy that soon we will never hear from Kamala Jones again?
This one hit behind the barn.
It seems Mohan does not understand the difference between a comment and an Answer.
A circuit breaker is similar, but is resettable.
Who is the most annoying character in the Office?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
What's your take on Eternal Sunshine of the Spotless Mind? How has it affected you?
First Sentence:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
These devices are installed between the “hot” and “neutral” and protective ground.
My boyfriend won’t tell me his past and it hurts me so I broke up with him what do I do?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
(Dc diagram shown, AC is similar).
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
Milky Way galaxy might not collide with Andromeda after all - Ars Technica
What does a fuse do?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
He then asserts :
A fuse is a non-resetable over current circuit protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So, the voltage could go up to 500 volts, and the fuse will not open up.
what exactly is a ‘surge’ protector?
Barnstars:
There are three different concepts here that are getting confused.
[old diagram got deleted by accident]
But… the neutral is now “floating” because of the 1 ohm resistance.
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
At one ohm, the resistor has a maximum of 1 watt power.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This device then solves the entire problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The other is “what does a “fuse” do?”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
Edit 2024–10.
These are simplified answers to the original question, and does not change anything I wrote above.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
eight
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes the function of a fuse.
but this device (an Inductor) … impedes the rapid changes in the current.
Upvotes:
a photo is worth a thousand words.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
I post the exact comment here.
In schematic diagrams this is the symbol for a fuse:
One is “what exactly is in a ‘surge protector’ ? ”